diff --git a/source/engine/thirdparty/stb/include/stb_vorbis.h b/source/engine/thirdparty/stb/include/stb_vorbis.h new file mode 100644 index 0000000..b0589bf --- /dev/null +++ b/source/engine/thirdparty/stb/include/stb_vorbis.h @@ -0,0 +1,418 @@ +// Ogg Vorbis audio decoder - v1.22 - public domain +// http://nothings.org/stb_vorbis/ +// +// Original version written by Sean Barrett in 2007. +// +// Originally sponsored by RAD Game Tools. Seeking implementation +// sponsored by Phillip Bennefall, Marc Andersen, Aaron Baker, +// Elias Software, Aras Pranckevicius, and Sean Barrett. +// +// LICENSE +// +// See end of file for license information. +// +// Limitations: +// +// - floor 0 not supported (used in old ogg vorbis files pre-2004) +// - lossless sample-truncation at beginning ignored +// - cannot concatenate multiple vorbis streams +// - sample positions are 32-bit, limiting seekable 192Khz +// files to around 6 hours (Ogg supports 64-bit) +// +// Feature contributors: +// Dougall Johnson (sample-exact seeking) +// +// Bugfix/warning contributors: +// Terje Mathisen Niklas Frykholm Andy Hill +// Casey Muratori John Bolton Gargaj +// Laurent Gomila Marc LeBlanc Ronny Chevalier +// Bernhard Wodo Evan Balster github:alxprd +// Tom Beaumont Ingo Leitgeb Nicolas Guillemot +// Phillip Bennefall Rohit Thiago Goulart +// github:manxorist Saga Musix github:infatum +// Timur Gagiev Maxwell Koo Peter Waller +// github:audinowho Dougall Johnson David Reid +// github:Clownacy Pedro J. Estebanez Remi Verschelde +// AnthoFoxo github:morlat Gabriel Ravier +// +// Partial history: +// 1.22 - 2021-07-11 - various small fixes +// 1.21 - 2021-07-02 - fix bug for files with no comments +// 1.20 - 2020-07-11 - several small fixes +// 1.19 - 2020-02-05 - warnings +// 1.18 - 2020-02-02 - fix seek bugs; parse header comments; misc warnings etc. +// 1.17 - 2019-07-08 - fix CVE-2019-13217..CVE-2019-13223 (by ForAllSecure) +// 1.16 - 2019-03-04 - fix warnings +// 1.15 - 2019-02-07 - explicit failure if Ogg Skeleton data is found +// 1.14 - 2018-02-11 - delete bogus dealloca usage +// 1.13 - 2018-01-29 - fix truncation of last frame (hopefully) +// 1.12 - 2017-11-21 - limit residue begin/end to blocksize/2 to avoid large temp allocs in bad/corrupt files +// 1.11 - 2017-07-23 - fix MinGW compilation +// 1.10 - 2017-03-03 - more robust seeking; fix negative ilog(); clear error in open_memory +// 1.09 - 2016-04-04 - back out 'truncation of last frame' fix from previous version +// 1.08 - 2016-04-02 - warnings; setup memory leaks; truncation of last frame +// 1.07 - 2015-01-16 - fixes for crashes on invalid files; warning fixes; const +// 1.06 - 2015-08-31 - full, correct support for seeking API (Dougall Johnson) +// some crash fixes when out of memory or with corrupt files +// fix some inappropriately signed shifts +// 1.05 - 2015-04-19 - don't define __forceinline if it's redundant +// 1.04 - 2014-08-27 - fix missing const-correct case in API +// 1.03 - 2014-08-07 - warning fixes +// 1.02 - 2014-07-09 - declare qsort comparison as explicitly _cdecl in Windows +// 1.01 - 2014-06-18 - fix stb_vorbis_get_samples_float (interleaved was correct) +// 1.0 - 2014-05-26 - fix memory leaks; fix warnings; fix bugs in >2-channel; +// (API change) report sample rate for decode-full-file funcs +// +// See end of file for full version history. + + +////////////////////////////////////////////////////////////////////////////// +// +// HEADER BEGINS HERE +// + +#ifndef STB_VORBIS_INCLUDE_STB_VORBIS_H +#define STB_VORBIS_INCLUDE_STB_VORBIS_H + +#if defined(STB_VORBIS_NO_CRT) && !defined(STB_VORBIS_NO_STDIO) +#define STB_VORBIS_NO_STDIO 1 +#endif + +#ifndef STB_VORBIS_NO_STDIO +#include +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/////////// THREAD SAFETY + +// Individual stb_vorbis* handles are not thread-safe; you cannot decode from +// them from multiple threads at the same time. However, you can have multiple +// stb_vorbis* handles and decode from them independently in multiple thrads. + + +/////////// MEMORY ALLOCATION + +// normally stb_vorbis uses malloc() to allocate memory at startup, +// and alloca() to allocate temporary memory during a frame on the +// stack. (Memory consumption will depend on the amount of setup +// data in the file and how you set the compile flags for speed +// vs. size. In my test files the maximal-size usage is ~150KB.) +// +// You can modify the wrapper functions in the source (setup_malloc, +// setup_temp_malloc, temp_malloc) to change this behavior, or you +// can use a simpler allocation model: you pass in a buffer from +// which stb_vorbis will allocate _all_ its memory (including the +// temp memory). "open" may fail with a VORBIS_outofmem if you +// do not pass in enough data; there is no way to determine how +// much you do need except to succeed (at which point you can +// query get_info to find the exact amount required. yes I know +// this is lame). +// +// If you pass in a non-NULL buffer of the type below, allocation +// will occur from it as described above. Otherwise just pass NULL +// to use malloc()/alloca() + +typedef struct +{ + char *alloc_buffer; + int alloc_buffer_length_in_bytes; +} stb_vorbis_alloc; + + +/////////// FUNCTIONS USEABLE WITH ALL INPUT MODES + +typedef struct stb_vorbis stb_vorbis; + +typedef struct +{ + unsigned int sample_rate; + int channels; + + unsigned int setup_memory_required; + unsigned int setup_temp_memory_required; + unsigned int temp_memory_required; + + int max_frame_size; +} stb_vorbis_info; + +typedef struct +{ + char *vendor; + + int comment_list_length; + char **comment_list; +} stb_vorbis_comment; + +// get general information about the file +extern stb_vorbis_info stb_vorbis_get_info(stb_vorbis *f); + +// get ogg comments +extern stb_vorbis_comment stb_vorbis_get_comment(stb_vorbis *f); + +// get the last error detected (clears it, too) +extern int stb_vorbis_get_error(stb_vorbis *f); + +// close an ogg vorbis file and free all memory in use +extern void stb_vorbis_close(stb_vorbis *f); + +// this function returns the offset (in samples) from the beginning of the +// file that will be returned by the next decode, if it is known, or -1 +// otherwise. after a flush_pushdata() call, this may take a while before +// it becomes valid again. +// NOT WORKING YET after a seek with PULLDATA API +extern int stb_vorbis_get_sample_offset(stb_vorbis *f); + +// returns the current seek point within the file, or offset from the beginning +// of the memory buffer. In pushdata mode it returns 0. +extern unsigned int stb_vorbis_get_file_offset(stb_vorbis *f); + +/////////// PUSHDATA API + +#ifndef STB_VORBIS_NO_PUSHDATA_API + +// this API allows you to get blocks of data from any source and hand +// them to stb_vorbis. you have to buffer them; stb_vorbis will tell +// you how much it used, and you have to give it the rest next time; +// and stb_vorbis may not have enough data to work with and you will +// need to give it the same data again PLUS more. Note that the Vorbis +// specification does not bound the size of an individual frame. + +extern stb_vorbis *stb_vorbis_open_pushdata( + const unsigned char * datablock, int datablock_length_in_bytes, + int *datablock_memory_consumed_in_bytes, + int *error, + const stb_vorbis_alloc *alloc_buffer); +// create a vorbis decoder by passing in the initial data block containing +// the ogg&vorbis headers (you don't need to do parse them, just provide +// the first N bytes of the file--you're told if it's not enough, see below) +// on success, returns an stb_vorbis *, does not set error, returns the amount of +// data parsed/consumed on this call in *datablock_memory_consumed_in_bytes; +// on failure, returns NULL on error and sets *error, does not change *datablock_memory_consumed +// if returns NULL and *error is VORBIS_need_more_data, then the input block was +// incomplete and you need to pass in a larger block from the start of the file + +extern int stb_vorbis_decode_frame_pushdata( + stb_vorbis *f, + const unsigned char *datablock, int datablock_length_in_bytes, + int *channels, // place to write number of float * buffers + float ***output, // place to write float ** array of float * buffers + int *samples // place to write number of output samples + ); +// decode a frame of audio sample data if possible from the passed-in data block +// +// return value: number of bytes we used from datablock +// +// possible cases: +// 0 bytes used, 0 samples output (need more data) +// N bytes used, 0 samples output (resynching the stream, keep going) +// N bytes used, M samples output (one frame of data) +// note that after opening a file, you will ALWAYS get one N-bytes,0-sample +// frame, because Vorbis always "discards" the first frame. +// +// Note that on resynch, stb_vorbis will rarely consume all of the buffer, +// instead only datablock_length_in_bytes-3 or less. This is because it wants +// to avoid missing parts of a page header if they cross a datablock boundary, +// without writing state-machiney code to record a partial detection. +// +// The number of channels returned are stored in *channels (which can be +// NULL--it is always the same as the number of channels reported by +// get_info). *output will contain an array of float* buffers, one per +// channel. In other words, (*output)[0][0] contains the first sample from +// the first channel, and (*output)[1][0] contains the first sample from +// the second channel. +// +// *output points into stb_vorbis's internal output buffer storage; these +// buffers are owned by stb_vorbis and application code should not free +// them or modify their contents. They are transient and will be overwritten +// once you ask for more data to get decoded, so be sure to grab any data +// you need before then. + +extern void stb_vorbis_flush_pushdata(stb_vorbis *f); +// inform stb_vorbis that your next datablock will not be contiguous with +// previous ones (e.g. you've seeked in the data); future attempts to decode +// frames will cause stb_vorbis to resynchronize (as noted above), and +// once it sees a valid Ogg page (typically 4-8KB, as large as 64KB), it +// will begin decoding the _next_ frame. +// +// if you want to seek using pushdata, you need to seek in your file, then +// call stb_vorbis_flush_pushdata(), then start calling decoding, then once +// decoding is returning you data, call stb_vorbis_get_sample_offset, and +// if you don't like the result, seek your file again and repeat. +#endif + + +////////// PULLING INPUT API + +#ifndef STB_VORBIS_NO_PULLDATA_API +// This API assumes stb_vorbis is allowed to pull data from a source-- +// either a block of memory containing the _entire_ vorbis stream, or a +// FILE * that you or it create, or possibly some other reading mechanism +// if you go modify the source to replace the FILE * case with some kind +// of callback to your code. (But if you don't support seeking, you may +// just want to go ahead and use pushdata.) + +#if !defined(STB_VORBIS_NO_STDIO) && !defined(STB_VORBIS_NO_INTEGER_CONVERSION) +extern int stb_vorbis_decode_filename(const char *filename, int *channels, int *sample_rate, short **output); +#endif +#if !defined(STB_VORBIS_NO_INTEGER_CONVERSION) +extern int stb_vorbis_decode_memory(const unsigned char *mem, int len, int *channels, int *sample_rate, short **output); +#endif +// decode an entire file and output the data interleaved into a malloc()ed +// buffer stored in *output. The return value is the number of samples +// decoded, or -1 if the file could not be opened or was not an ogg vorbis file. +// When you're done with it, just free() the pointer returned in *output. + +extern stb_vorbis * stb_vorbis_open_memory(const unsigned char *data, int len, + int *error, const stb_vorbis_alloc *alloc_buffer); +// create an ogg vorbis decoder from an ogg vorbis stream in memory (note +// this must be the entire stream!). on failure, returns NULL and sets *error + +#ifndef STB_VORBIS_NO_STDIO +extern stb_vorbis * stb_vorbis_open_filename(const char *filename, + int *error, const stb_vorbis_alloc *alloc_buffer); +// create an ogg vorbis decoder from a filename via fopen(). on failure, +// returns NULL and sets *error (possibly to VORBIS_file_open_failure). + +extern stb_vorbis * stb_vorbis_open_file(FILE *f, int close_handle_on_close, + int *error, const stb_vorbis_alloc *alloc_buffer); +// create an ogg vorbis decoder from an open FILE *, looking for a stream at +// the _current_ seek point (ftell). on failure, returns NULL and sets *error. +// note that stb_vorbis must "own" this stream; if you seek it in between +// calls to stb_vorbis, it will become confused. Moreover, if you attempt to +// perform stb_vorbis_seek_*() operations on this file, it will assume it +// owns the _entire_ rest of the file after the start point. Use the next +// function, stb_vorbis_open_file_section(), to limit it. + +extern stb_vorbis * stb_vorbis_open_file_section(FILE *f, int close_handle_on_close, + int *error, const stb_vorbis_alloc *alloc_buffer, unsigned int len); +// create an ogg vorbis decoder from an open FILE *, looking for a stream at +// the _current_ seek point (ftell); the stream will be of length 'len' bytes. +// on failure, returns NULL and sets *error. note that stb_vorbis must "own" +// this stream; if you seek it in between calls to stb_vorbis, it will become +// confused. +#endif + +extern int stb_vorbis_seek_frame(stb_vorbis *f, unsigned int sample_number); +extern int stb_vorbis_seek(stb_vorbis *f, unsigned int sample_number); +// these functions seek in the Vorbis file to (approximately) 'sample_number'. +// after calling seek_frame(), the next call to get_frame_*() will include +// the specified sample. after calling stb_vorbis_seek(), the next call to +// stb_vorbis_get_samples_* will start with the specified sample. If you +// do not need to seek to EXACTLY the target sample when using get_samples_*, +// you can also use seek_frame(). + +extern int stb_vorbis_seek_start(stb_vorbis *f); +// this function is equivalent to stb_vorbis_seek(f,0) + +extern unsigned int stb_vorbis_stream_length_in_samples(stb_vorbis *f); +extern float stb_vorbis_stream_length_in_seconds(stb_vorbis *f); +// these functions return the total length of the vorbis stream + +extern int stb_vorbis_get_frame_float(stb_vorbis *f, int *channels, float ***output); +// decode the next frame and return the number of samples. the number of +// channels returned are stored in *channels (which can be NULL--it is always +// the same as the number of channels reported by get_info). *output will +// contain an array of float* buffers, one per channel. These outputs will +// be overwritten on the next call to stb_vorbis_get_frame_*. +// +// You generally should not intermix calls to stb_vorbis_get_frame_*() +// and stb_vorbis_get_samples_*(), since the latter calls the former. + +#ifndef STB_VORBIS_NO_INTEGER_CONVERSION +extern int stb_vorbis_get_frame_short_interleaved(stb_vorbis *f, int num_c, short *buffer, int num_shorts); +extern int stb_vorbis_get_frame_short (stb_vorbis *f, int num_c, short **buffer, int num_samples); +#endif +// decode the next frame and return the number of *samples* per channel. +// Note that for interleaved data, you pass in the number of shorts (the +// size of your array), but the return value is the number of samples per +// channel, not the total number of samples. +// +// The data is coerced to the number of channels you request according to the +// channel coercion rules (see below). You must pass in the size of your +// buffer(s) so that stb_vorbis will not overwrite the end of the buffer. +// The maximum buffer size needed can be gotten from get_info(); however, +// the Vorbis I specification implies an absolute maximum of 4096 samples +// per channel. + +// Channel coercion rules: +// Let M be the number of channels requested, and N the number of channels present, +// and Cn be the nth channel; let stereo L be the sum of all L and center channels, +// and stereo R be the sum of all R and center channels (channel assignment from the +// vorbis spec). +// M N output +// 1 k sum(Ck) for all k +// 2 * stereo L, stereo R +// k l k > l, the first l channels, then 0s +// k l k <= l, the first k channels +// Note that this is not _good_ surround etc. mixing at all! It's just so +// you get something useful. + +extern int stb_vorbis_get_samples_float_interleaved(stb_vorbis *f, int channels, float *buffer, int num_floats); +extern int stb_vorbis_get_samples_float(stb_vorbis *f, int channels, float **buffer, int num_samples); +// gets num_samples samples, not necessarily on a frame boundary--this requires +// buffering so you have to supply the buffers. DOES NOT APPLY THE COERCION RULES. +// Returns the number of samples stored per channel; it may be less than requested +// at the end of the file. If there are no more samples in the file, returns 0. + +#ifndef STB_VORBIS_NO_INTEGER_CONVERSION +extern int stb_vorbis_get_samples_short_interleaved(stb_vorbis *f, int channels, short *buffer, int num_shorts); +extern int stb_vorbis_get_samples_short(stb_vorbis *f, int channels, short **buffer, int num_samples); +#endif +// gets num_samples samples, not necessarily on a frame boundary--this requires +// buffering so you have to supply the buffers. Applies the coercion rules above +// to produce 'channels' channels. Returns the number of samples stored per channel; +// it may be less than requested at the end of the file. If there are no more +// samples in the file, returns 0. + +#endif + +//////// ERROR CODES + +enum STBVorbisError +{ + VORBIS__no_error, + + VORBIS_need_more_data=1, // not a real error + + VORBIS_invalid_api_mixing, // can't mix API modes + VORBIS_outofmem, // not enough memory + VORBIS_feature_not_supported, // uses floor 0 + VORBIS_too_many_channels, // STB_VORBIS_MAX_CHANNELS is too small + VORBIS_file_open_failure, // fopen() failed + VORBIS_seek_without_length, // can't seek in unknown-length file + + VORBIS_unexpected_eof=10, // file is truncated? + VORBIS_seek_invalid, // seek past EOF + + // decoding errors (corrupt/invalid stream) -- you probably + // don't care about the exact details of these + + // vorbis errors: + VORBIS_invalid_setup=20, + VORBIS_invalid_stream, + + // ogg errors: + VORBIS_missing_capture_pattern=30, + VORBIS_invalid_stream_structure_version, + VORBIS_continued_packet_flag_invalid, + VORBIS_incorrect_stream_serial_number, + VORBIS_invalid_first_page, + VORBIS_bad_packet_type, + VORBIS_cant_find_last_page, + VORBIS_seek_failed, + VORBIS_ogg_skeleton_not_supported +}; + + +#ifdef __cplusplus +} +#endif + +#endif // STB_VORBIS_INCLUDE_STB_VORBIS_H +// +// HEADER ENDS HERE +// +////////////////////////////////////////////////////////////////////////////// \ No newline at end of file